Search

Divizoare de Probe RT 100

Solicitați o cotaţie 
Fișa tehnică

Limbă:

A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.
The RT 100 is equipped with a feed hopper with closed outlet. Thus, up to 30 l sample material may be evenly spread over the entire width of the hopper. The outlet is opened manually by moving a lever and the sample is splitted. The slots of the dividing head can be adjusted to a maximum width of 108 mm.
The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.

Exemple de Aplicații

agenţi de creştere, cafea, clincher ciment, fertilizatori, făinuri, grâne, materiale de construcţii, minerale, nuci, pulbere de spălare, pulberi metalice, sand, seminte, soluri, substanţe chimice, ...

Avantaje Produs

  • pentru utilizarea în laborator și pe teren
  • proces manual de divizare de înaltă precizie
  • proces de împărțire optimizat prin răspândirea uniformă a probei pe buncăr
  • Lățimile variabile ale fantei permit împărțirea materialului grosier
  • proces de divizare conform DIN 51701

Caracteristici tehnice

Aplicabilitateeșantionare și distribuția eșantioanelor
Domenii in care se utilizeazaagricultură, alimente, biologie, chimie/plastic, geologie/metalurgie, inginerie/electronică, materiale de construcții, medicină/produse farmaceutice , mediu/reciclare, sticlă/ceramică
Material probămateriale în vrac
Dimensiunea probei*Slot width adjustable 12 / 24 / 36 / 48 / 60 / 72 / 84 / 96 / 108 mm
Volum/masă probă admisă*<= 30 l
Număr de distribuții2
W x H x D72 x 70 x 46 cm
Masa netă: ~ 55 kg
* în funcție de materialul probei și configurația/setările instrumentului

Principiu de funcţionare

With sample splitters, one of the receptacles is used to pour a well mixed sample evenly into the dividing head. The material runs through the alternately arranged passages in the opposite direction into the two collecting receptacles under the dividing head outlets. With every operation the feed sample is halved. This can be repeated as many times as necessary until the required dividing quantity has been obtained.

Supus modificărilor şi erorilor tehnice