Moară ultracentrifugală ZM 200

Ultra Centrifugal Mill ZM 200

Solicita o estimare gratuita, fără caracter obligatoriu!
Vă rugăm să selectați elementele pe care doriți să le includeți adăugându-le in lista de solicitare.
După ce ați adăugat un element, lista va fi vizibilă în colțul din dreapta sus al site-ului

Ultra Centrifugal Mill ZM 200

with 900 ml cassette (please order push-fit rotor and ring sieve separately)
20.823.0001
ZM 200230 V, 50/60 Hz 
other electrical versions available for the same price
 

Accessories ZM 200

Push-fit rotors of stainless steel

Selection help
Type of rotors:

  • 6-teeth rotor:
    Used for coarse, fibrous and bulky samples like hay, straw or feed pellets.

  • 12-teeth rotor:
    Used for a large variety of (medium-coarse) samples such as grain, plastic pellets or tablets.

  • 24-teeth rotor:
    Used for fine sample materials like sugar or chemicals.
Please note:

For special applications like pulverization of abrasive samples, heavy-metal-free grinding or homogenization of very small sample volumes further rotors are available – see the corresponding section of the order data.
02.608.0040
Push-fit rotor6 teeth 
02.608.0041
Push-fit rotor12 teeth 
02.608.0042
Push-fit rotor24 teeth 
 

Ring sieves of stainless steel

Selection help
Type of ring sieves:

  • Stainless steel ring sieves:
    Used for standard applications and samples.

  • Stainless steel ring sieves with reinforced rim:
    Used for pulverizing hard sample materials which put a high strain on the sieve. The reinforced rim serves to stabilize the sieves.

  • Distance sieves:
    Ideal for grinding samples which contain fat, like some grain types or oil seeds. The sample releases less fat which means it doesn’t clump and the sieve doesn’t get blocked.

    Distande sieves leave a gap between rotor and sieve which substantially reduces the shearing effect. Consequently, there is less heat build-up which makes these sieves suitable for processing heat-sensitive sample materials.

    Distance sieves may also be used for cryogenic grinding.
 

Ring sieves of stainless steel

03.647.0231
Trapezoid holes0.08 mm 
03.647.0232
Trapezoid holes0.12 mm 
03.647.0233
Trapezoid holes0.20 mm 
03.647.0234
Trapezoid holes0.25 mm 
03.647.0396
Trapezoid holes0.35 mm 
03.647.0235
Trapezoid holes0.50 mm 
03.647.0236
Trapezoid holes0.75 mm 
03.647.0237
Trapezoid holes1.00 mm 
03.647.0238
Trapezoid holes1.50 mm 
03.647.0239
Trapezoid holes2.00 mm 
03.647.0240
Round holes3.00 mm 
03.647.0241
Round holes4.00 mm 
03.647.0242
Round holes5.00 mm 
03.647.0243
Round holes6.00 mm 
 

Ring sieves of stainless steel, with reinforced rim,
recommended for heavy-duty usage

03.647.0244
Trapezoid holes0.08 mm 
03.647.0245
Trapezoid holes0.12 mm 
03.647.0246
Trapezoid holes0.20 mm 
03.647.0247
Trapezoid holes0.25 mm 
03.647.0397
Trapezoid holes0.35 mm 
03.647.0248
Trapezoid holes0.50 mm 
03.647.0249
Trapezoid holes0.75 mm 
03.647.0250
Trapezoid holes1.00 mm 
03.647.0251
Trapezoid holes1.50 mm 
03.647.0252
Trapezoid holes2.00 mm 
03.647.0272
Round holes3.00 mm 
03.647.0273
Round holes4.00 mm 
03.647.0274
Round holes5.00 mm 
03.647.0275
Round holes6.00 mm 
 

Distance sieves of stainless steel,
recommended for temperature-sensitive and fatty materials

03.647.0253
Trapezoid holes0.08 mm 
03.647.0254
Trapezoid holes0.12 mm 
03.647.0255
Trapezoid holes0.20 mm 
03.647.0256
Trapezoid holes0.25 mm 
03.647.0394
Trapezoid holes0.35 mm 
03.647.0257
Trapezoid holes0.50 mm 
03.647.0258
Trapezoid holes0.75 mm 
03.647.0259
Trapezoid holes1.00 mm 
03.647.0260
Trapezoid holes1.50 mm 
03.647.0304
Trapezoid holes2.00 mm 
03.647.0261
Round holes4.00 mm 
03.647.0298
Square holes10.00 mmfor pre-grinding
 

Accessories ZM 200 for abrasive products

Recommended use
Always use grinding tools with wear-resistant coating to pulverize abrasive samples like computer waste or some types of chemicals.
 

Push-fit rotors of stainless steel, with wear resistant coating

Selection help
Type of rotors:

  • 6-teeth rotor:
    Used for coarse, fibrous and bulky samples like hay or straw.

  • 12-teeth rotor:
    Used for a large variety of (medium-coarse) samples such as coal, coke or fertilizers.

  • 24-teeth rotor:
    Used for fine sample materials like chemicals.
Please note:

For special applications like pulverization of abrasive samples, heavy-metal-free grinding or homogenization of very small sample volumes further rotors are available – see the corresponding section of the order data.
02.608.0043
Push-fit rotor6 teeth 
02.608.0044
Push-fit rotor12 teeth 
02.608.0045
Push-fit rotor24 teeth 
 

Ring sieves of stainless steel, with reinforced rim, with wear resistant coating

03.647.0262
Trapezoid holes0.20 mm 
03.647.0263
Trapezoid holes0.25 mm 
03.647.0264
Trapezoid holes0.50 mm 
03.647.0265
Trapezoid holes0.75 mm 
03.647.0266
Trapezoid holes1.00 mm 
03.647.0267
Trapezoid holes1.50 mm 
03.647.0268
Trapezoid holes2.00 mm 
03.647.0269
Round holes3.00 mm 
 

Accessories ZM 200 for grinding without heavy-metal contamination

Recommended use
For heavy-metal-free size reduction of non-abrasive samples grinding tools made of pure titanium are available. These ensure that the sample is not contaminated by traces of heavy metals. For this application rotor, sieve and cassette should be made of titanium.
 

Rotor and cassette

02.608.0047Push-fit rotor, 12 teeth of pure titanium
22.355.0006Cassette 900 ml with coating of titanium-niob, complete (pan and lid with gasket)
 

Ring sieves of of pure titanium

Selection help
For heavy-metal-free size reduction of non-abrasive samples grinding tools made of pure titanium are available.

Types of ring sieves:

  • Stainless steel ring sieves with reinforced rim:
    Used for pulverizing hard sample materials which put a high strain on the sieve. The reinforced rim serves to stabilize the sieves.

  • Distance sieves:
    Ideal for grinding samples which contain fat, like some grain types or oil seeds. The sample releases less fat which means it doesn’t clump and the sieve doesn’t get blocked.

    Distande sieves leave a gap between rotor and sieve which substantially reduces the shearing effect. Consequently, there is less heat build-up which makes these sieves suitable for processing heat-sensitive sample materials.

    Distance sieves may also be used for cryogenic grinding.
 

Ring sieves of pure titanium, with reinforced rim

03.647.0270
Trapezoid holes0.08 mm 
03.647.0271
Trapezoid holes0.12 mm 
03.647.0276
Trapezoid holes0.20 mm 
03.647.0277
Trapezoid holes0.25 mm 
03.647.0278
Trapezoid holes0.50 mm 
03.647.0279
Trapezoid holes0.75 mm 
03.647.0280
Trapezoid holes1.00 mm 
03.647.0281
Trapezoid holes1.50 mm 
03.647.0282
Trapezoid holes2.00 mm 
03.647.0283
Round holes4.00 mm 
 

Distance sieves of pure titanium

03.647.0303
Trapezoid holes0.50 mm 
03.647.0375
Trapezoid holes1.00 mm 
 

Cyclones ZM 200

incl. cassette pan with outlet and support

Recommended use
The use of the cyclone is recommended for processing sample volumes >300 ml as the generated air stream carries the sample from the cassette with outlet into a sample bottle or collecting vessel with a max. volume of 5 l.

Moreover, the sample is cooled which is particularly beneficial for heat-sensitive materials. The use of the vacuum cleaner has a greater cooling effect than the filter bag.

The cyclone is also suitable for cooling small sample volumes.
22.935.0014Cyclone with filter bag, with sample bottles 0.25 and 0.5 litres
22.935.0015Cyclone with filter bag, with collecting receptacle 3 litres
22.935.0016Cyclone with filter bag, with collecting receptacle 5 litres
22.935.0017Cyclone with connection for vacuum cleaner, with sample bottles 0.25 and 0.5 litres
22.935.0018Cyclone with connection for vacuum cleaner, with collecting receptacle 3 litres
22.935.0019Cyclone with connection for vacuum cleaner, with collecting receptacle 5 litres
22.748.0005Industrial vacuum cleaner for mills, 230 V, 50/60 Hz
(other electrical versions and spare filter bags available upon request)
 

Paper filter bags ZM 200

22.261.0003Paper filter bags (12 pieces) incl. cassette pan with outlet and filter holder
 

Accessories ZM 200 for grinding small quantities

Recommended use
For the homogenization of very small sample amounts the ZM 200 may be used with the optional mini cassette for volumes up to 20 ml and the 8-teeth rotor with a 70 mm diameter. 

Thanks to the small surface of the 50 ml cassette, small sample volumes are easily recovered. Suitable ring sieves are available with aperture sizes from 0.08 to 2 mm. 

All parts coming into contact with the sample, including the cassette, are made of 1.4404 steel (316).
 

Rotor and cassette

22.786.0002Conversion kit for grinding small quantities consisting of push-fit rotor with 8 teeth, labyrinth disc, cassette 50 ml
02.608.0057Push-fit rotor, 8 teeth, corrosion-resistant steel 1.4404 (316), 70 mm Ø
02.010.0039Cassette 50 ml for small quantities, complete (pan, lid, gasket),
corrosion resistant steel 1.4404 (316)
 

Ring sieves of corrosion resistant steel 1.4404 (316), 70 mm Ø

03.647.0287
Trapezoid holes0.08 mm 
03.647.0288
Trapezoid holes0.12 mm 
03.647.0289
Trapezoid holes0.20 mm 
03.647.0290
Trapezoid holes0.25 mm 
03.647.0285
Trapezoid holes0.50 mm 
03.647.0291
Trapezoid holes0.75 mm 
03.647.0292
Trapezoid holes1.00 mm 
03.647.0293
Trapezoid holes1.50 mm 
03.647.0294
Trapezoid holes2.00 mm 
 

Vibratory Feeder DR 100 for automatic material feed

Recommended use
The use of the Vibratory Feeder DR 100 is recommended for grinding of large sample volumes up to 3.5 l.

Due to the automated sample feed, the size reduction process may be carried out virtually unsupervised. The DR 100 allows for adjustment of the feeding process to the physical sample properties and desired final fineness (e. g. soft samples may be easier to convey than hard ones, just like samples with a small feed size).

Overloading the mill by feeding the sample too rapidly can be effectively avoided by using the Vibratory Feeder DR 100 overload of the mill. 
DR 100 complete unit, incl. feeding kit (push-fit feed chute 75/40 mm, length 250mm, holder for push-fit feed chute, hopper 3.5 litres and fixture for hopper), stand with data cable
22.936.1001
DR 100220–240 V, 50 Hz 
22.936.1002
DR 100110–120 V, 60 Hz 
 

Additional items ZM 200

02.010.0037Cassette complete, stainless steel, incl. pan 900 ml, lid with gasket
22.355.0009Cassette complete, stainless steel, incl. pan with outlet, lid with gasket
22.355.0006Cassette complete, titanium-niob coating, incl. pan 900 ml, lid with gasket
03.010.0037Cassette pan 900 ml, stainless steel
02.010.0046Cassette pan with outlet, stainless steel
03.010.0041Cassette pan 900 ml, titanium-niob coating
22.355.0003Cassette lid, stainless steel, with gasket
22.355.0005Cassette lid, titanium-niob coating, with gasket
03.111.0201Gasket for cassette lid
22.936.0007Set of gaskets for cassette lid, 5 pieces
02.011.0029Collecting receptacle for cyclone, 5 litres, stainless steel
02.011.0031Collecting receptacle for cyclone, 3 litres, stainless steel
02.186.0010Filter bag of nylon, for cyclone
22.524.0001Paper filter bags, 12 pieces
05.708.0065Protective grating with dust filter for fan
22.524.0003Dust filter for fan, 10 pieces
99.200.0005IQ/OQ Documentation for ZM 200
 

Material Composition of Equipment and Accessories

DetailsClick here for detailed information