Moară tăietoare SM 400 XL

Download Brochure Generare PDF produs
Close

Limbă:


Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 XL is ideally suited for pre-cutting of large sample pieces but, depending on the application,  may also achieve the required fineness in one step.

The high torque of the new 3 kW drive with flywheel mass allows for an exceptionally effective preliminary size reduction of heterogeneous mixtures, such as waste or electronic components.

The cutting mill is used successfully for a great variety of materials. The sample is only moderately warmed up during the grinding process so that the mill is perfectly suitable for grinding temperature-sensitive materials.  Due to the large open surface of the 240 mm x 240 mm bottom sieve, it is possible to grind large sample quantities and to increase the throughput.

When operated with the optional cyclone-suction-combination, the SM 400 XL is also suitable for grinding light sample materials. In combination with the wide choice of bottom sieves, hoppers and collecting vessels, the mill can be easily adapted to varying application requirements.

Exemple de Aplicaţii:

alimente, cabluri, carton, cauciuc, combustibili derivaţi din reziduuri, componente electronice, compoziții de materiale, condimente, deşeuri, folii, furaje, furaje granulate, hârtie, jucării din plastic, lemn, lignit, materiale de plantare, materiale plastice, metale neferoase, oase, paie, piele, polimeri, preforme PET, produse farmaceutice, rasini , textile, zgură de aluminiu, ... continue to application database

Avantaje Produs

  • powerful size reduction thanks to 3 kW drive
  • efecte optime de tăiere
  • accepts large feed sizes up to 170 mm x 220 mm
  • quick and easy cleaning due to fold-back hopper, smooth surfaces
  • defined final fineness due to bottom sieves with aperture sizes from 1 - 20 mm

Caracteristici tehnice

Aplicabilitate reducerea dimensiunii prin tăiere
Domenii in care se utilizeaza agricultură, biologie, chimie/plastic, inginerie/electronică, mediu/reciclare, alimente, medicină/produse farmaceutice
Material de macinat moale, duritate medie, dur, elastic, fibros
Principiul de reducere a dimensiunii forfecare, tăiere
Dimensiunea maximă a materialului de macinat < 170 x 220 mm
Finețe finală 1 - 20 mm
Volumul camerei de macinare ~7.45L
Viteza la 50 Hz (60 Hz) 280 min-1
Viteză periferică rotor 2.25 m/s
Diametru rotor 152 mm
Tipuri de rotor parallel section rotor
Tipuri de buncare de încărcare universală, spectru larg
Material de constructie a elementelor de macinare oţel călit, carbura de wolfram
Dimensiuni ochiuri site trapezoid holes 1.00 / 2.00 mm
round holes 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm
Sisteme / capacități colector: collecting receptacle 5 l
optional: cyclone-suction combination
Antrenare motor electric
Putere motor 3 kW with flywheel mass
Alimentare electrica 230 V, 50 Hz
Conectare sursă de alimentare trifazic
Frână motor nu
Grad de protecție IP 54
W x H x D (închis) 695 x 1399 x 719 mm
Masa netă: ~ 180 kg
Standard CE

Vă rugăm reţineţi: 
* în funcție de materialul de alimentare și configurația/setările instrumentului

Principiu de funcţionare

Size reduction in the Cutting Mill SM 400 XL takes place by cutting and shearing forces. The sample hits the rotor and is comminuted between the blades and the stationary cutting bars inserted in the housing.

Thanks to the wide range of accessories, the SM 400 XL can be easily adapted to different application requirements

Supus modificărilor şi erorilor tehnice